Call Forward All And Call Forward-No Answer - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide
Call Forward All and Call Forward–No Answer
Call Forward All and Call Forward–No Answer redirect incoming calls. Once your Deskset
forwards a call, you cannot answer the call.
Call Appearance mode only — You can set Call Forward All to redirect calls

to your voicemail or Group Mailbox, an extension, a phone number, Auto
Attendant, or Ring Group. Your Deskset does not ring, but a message screen
appears to confirm that the call was forwarded. Your Deskset does not record
the call in its Call Log. Your company's caller ID is attached to calls that Call
Foward All sends to external numbers. The default destination is Voicemail.
To turn Call Forward All on or off, press
activated,
All overrides the Call Forward–No Answer setting set by your system
administrator.
You can set the Call Forward All destination in the User Settings menu or using
the WebUI. See
Call Forward–No Answer can only be set by the system administrator. This

setting determines the delay of, and the destination for, unanswered calls for
each extension. The default destination is Voicemail.
Call Appearance mode only — The Call Forward–No Answer setting does not
apply to Ring Group calls or to incoming calls at extensions that are part of a
Call Queue. See
To set the Call Forward destination:
1. Press MENU, then 2, and then 2. The Call Forward All menu appears.
2. Press
Mailbox. Then press

personal mailbox or a Group Mailbox (if enabled).
Ext. Then press

number.
Phone #. Then press

phone number. Enter a preceding 9 or whatever digit, if any, that must be dialed
for external calls.
AutoAtt. Then press

Attendant.
Deskset Settings
appears in the upper right corner of the display. Call Forward
FWD ON
"Basic Settings" on page
"Answering Calls in the Call Queue" on page
 
or to select one of the following targets:

to move to the to Mailbox: field and select your

to move to the to Ext: field and enter a valid extension

to move to the to Phone #: field and enter a valid

to move to the to AutoAtt: field and select an Auto
182
Back to Contents
when the Deskset is idle. When
CallFwd
209.
66.