Set Line Mode - AT&T MS2085 User Manual

Getting started
System setup
Line group
You can set an extension or several extensions to receive incoming calls from
a specific telephone line. Extensions that have not been selected will not ring
when there is an incoming call from that specific line.
1. When the console is idle, press MENU
2. Press SELECT to choose System Setup.
MENU/
3. Press or to scroll to Line Group then press
SELECT.
MENU/
4. Press or to choose the desired line and then
press SELECT.
MENU/
5. The screen displays Set Ext to Ring. Press
scroll to the desired extension, then press
Repeat this step until all desired extensions are selected.
• The extensions marked with a tick will ring when
there is an incoming call from the line chosen in
Step 4.
• The extensions not marked with a tick will not
ring when there is an incoming call from the line
chosen in Step 4, unless the caller tries to reach
the extension by entering that specific extension
number while playing the auto attendant
announcement (see Auto attendant on page 65).
6. Press or scroll to DONE then press
SELECT to save the setting. There is a
MENU/
confirmation tone. To exit without making changes,
press CANCEL.
.
/SELECT
or to
SELECT.
MENU/
21
L1 L2 L3 L4
System Setup
Set Ext No.
Unassign Ext No.
Prime Line
>Line Group

Set Line Mode

Set Master
L1 L2 L3 L4
Line Group
>Line 1
Line 2
Line 3
Line 4
L1 L2 L3 L4
Set Ext to Ring
>Administrat...11
Engineering 12
Marketing 13
Shipping 14
Accounting 15
Done