IBM H Series Installation And Service Manual page 371

– 0x5n Run-time recoverable error threshold exceeded (single-bit ECC
errors)
where
R=additional reason codes for BIST or POST failures (not used byfield
personnel)
n= number of failures or thresholds exceeded
Enable/Disable CPU Repeat Guard : Use this option to enable or disable CPU
Repeat Guard. Selecting this option causes the state to switch between enabled
and disabled.
Enable/Disable MEM Repeat Guard: Use this option to enable or disable MEM
Repeat Guard. Selecting this option causes the state to switch between enabled
and disabled.
Language Selection Menu
LANGUAGE SELECTION MENU
1. English
2. Francais
3. Deutsch
4. Italiano
5. Espanol
6. Svenska
98. Return to Previous Menu
99. Exit from Menus
Note: Your ASCII terminal must support the ISO-8859 character set in order to
properly display languages other than English.
This menu allows selecting languages into which Service Processor and system
firmware menus and messages are displayed.
Appendix C. Service Processor Menus
C-21