IBM H Series Installation And Service Manual page 128

Table 3-1 (Page 19 of 40). Firmware Error Codes.
Error Code Description
2BA00200 Service processor firmware update
error occurred, update not com-
pleted
Error occurred during service
processor flash write operation.
2BA00201 Service processor firmware update
error occurred, update not com-
pleted
Error occurred while reading service
processor CRC.
2BA00202 Service processor firmware update
error occurred, update not com-
pleted
Error occurred while verifying
service processor CRC.
2BA00203 Service processor firmware update
error occurred, update not com-
pleted
Error occurred while reading new
service processor CRC after
updating service processor
firmware.
2BA00204 Service processor firmware update
error occurred, update not com-
pleted
Error occurred while calculate CRC
write.
2BA00300 Service Processor reports Slow Fan
number 0
2BA00301 Service Processor reports Slow Fan
number 1
2BA00302 Service Processor reports Slow Fan
number 2
3-20
RS/6000 Enterprise Server Model H Series Installation and Service Guide
Action / Possible Failing FRU
Service processor firmware update error
recovery procedure:
1. Turn the system Off.
2. Unplug power cable and then plug
power cable back in.
3. Turn the system On.
4. Retry operation. If problem persists:
For Model H50: Replace Service
Processor.
For Model H70: Replace I/O board.
See error code 2BA00200 for recovery
procedure.
See error code 2BA00200 for recovery
procedure.
See error code 2BA00200 for recovery
procedure.
See error code 2BA00200 for recovery
procedure.
1. Replace Fan 0.
2. If problem persists, replace power
supply.
3. Replace I/O Board (See notes on 3-1.)
1. Replace Fan 1.
2. If problem persists, replace power
supply.
3. Replace I/O Board. (See notes on
3-1.)
1. Replace Fan 2.
2. If problem persists, replace power
supply.
3. Replace I/O Board (See notes on 3-1.)