IBM H Series Installation And Service Manual page 269

4. If you are removing a SCSI disk drive, press the Spin Down button on the drive.
Look at the green LED and wait until it stops flashing before continuing with the
next step.
5. Rotate the carrier latch to the open position.
SCSI Disk Drive
SSA Disk Drive
Check
Ready
Power
6. Pull the disk drive out of the drive bay, keeping it straight to prevent damage.
7. Place the disk drive in an antistatic bag.
8. Reminder: drawers with SSA disk drives must have a carrier in all positions. If
you are not exchanging the disk drive, install a blank carrier and replace the disk
drive cover.
Locked Position
Chapter 7. Removal and Replacement Procedures
7-15