IBM H Series Installation And Service Manual page 244

Utilities
The Utilities screen enables you to select from the following system management
tools.
Utilities
1. Set Password and Unattended Start Mode
2. SCSI Spin-Up
3. Display Error Log
4. Remote Initial Program Load Setup
5. Change SCSI id
6. Update System Firmware
7. Update Service Processor
8. Select Console
===>
Set Password and Unattended Start Mode:
access to the following options.
Password Utilities
1. Set Power On Password
2. Remove Power On Password
3. Unattended Start Mode <OFF>
4. Set Privileged-Access Password
5. Remove Privileged-Access Password
===>
6-30
RS/6000 Enterprise Server Model H Series Installation and Service Guide
.------.
|X=Exit|
------'
Entering this selection permits
.------.
|X=Exit|
------'