Table of Contents
Advertisement
6. Auto reset time
As a default setting, the copier will reset itself 1 minute after the final
copy is made or after the last time any key is pressed. If a 1 minute
reset time is not appropriate, you can change this time.
For how to change settings,
Default: 1 minute (Setting: 0)
Setting
Definition
7. Counter up/down
The copy counter can be set to show the number of copies made (count
up), or the number of copies remaining to be made (count down).
For how to change settings,
Default: Up (Setting: 0)
Setting
Definition
8. Check the total copy counter
You can check the total number of copies made.
How to check the total copy counter
1
Access user tool number "8".
You will find the first 2 digits of
the total copy quantity are dis-
played on the copy counter.
Example:
When 12345 copies are made,
"01" is displayed on the copy
counter.
At that time, the center image den-
sity indicator is lit.
see page 47.
0
1 minute
3 minutes
see page 47.
0
Up
1
Auto reset is turned off.
1
Down
USER TOOLS
2
51
Advertisement
Table of Contents
