Copying A One-Touch Dial Button - Konica Minolta BIZHUB 350 User Manual

4

Copying a one-touch dial button

1
Perform steps 1 through 4 of the procedure in "To program a one-
touch dial button".
2
Touch the one-touch dial button to be copied.
3
Touch [One-Touch], then [One-
Touch Copy].
4
Touch the one-touch dial button
where the information is copied to.
– Select a one-touch dial button
that has not yet been
programmed.
– To deselect the one-touch dial
button where the information is to
be copied to, touch the selected
one-touch dial button again.
5
Touch [Enter] until the initial screen appears.
4-36
Scan to E-Mail
bizhub 350/250 (Phase 2.5)