Receiving Os32C Configuration Information; Configuring New Os32C Property And Monitoring Zone; Default Configuration Settings - Omron OS32C Series User Manual

Receiving OS32C Configuration Information

The configuration software receives and displays current configuration information immediately upon
connection to the OS32C. Configuration information can be received manually as well. From Configuration
menu, click Receive from Sensor. Configuration information is retrieved from the sensor.

Configuring New OS32C Property and Monitoring Zone

To use the protective function of OS32C, a safety zone must be properly defined and configured.
If the response time is changed, re-calculation of the safety distance is required. This may require re-
configuration of the safety zones or re-installation of the OS32C. If the safety distance is not appropriate for
the application, the machine may not stop before the hazardous area is reached, resulting in severe injuries.
This section describes how to configure a new monitoring zone or change the operating properties of the
OS32C using the configuration software.


Default Configuration Settings

Safety Critical Parameters
External Device Monitoring
Response time (ms)
Monitoring zone
Zone delay (ms)
Operating mode
Minimum Object Resolution (mm)
Non-Safety Critical Parameters
Restart delay (ms)
Auxiliary output mode
Auxiliary output type
Auxiliary output polarity
Warning output mode
Warning output type
Warning output polarity
Power reserve mode
Seven-segment display
ISI option
ISI mode
Safety Zone
Shape
Radius (cm)
Scan angle (degrees)
Warning zone 1
Shape
Basic Operation of Configuration Software
Disable
80
Zone 1
60
Automatic Start
70
400
Follow OSSD
PNP
Active ON
Follow OSSD
PNP
Active ON
Disable
Enable - Non-Inverted
Enable
Follow safety zone
Circular segment
100
270
Circular segment
E
OS32C
47
User's Manual