Tool Bars - Omron OS32C Series User Manual



Tool Bars

(1) (2) (3) (4) (5) (6) (7) (8)
Fig. 3-2
(1) Create a new configuration
(2) Open configuration from file
(3) Save configuration to file
(4) Print configuration
(5) System Monitoring
(6) Sculpting
(7) Record system monitoring
(8) Playback system monitoring
Table 3-7
(1) (2) (3) (4) (5)
Fig. 3-3
(1) Change measurement unit
(2) Zoom in
(3) Zoom out
(4) Zoom window
(5) View center
(6) View all
(7) Toggle view panning
(8) Edit zone
(9) Convert shape to
(10) Undo
(11) Redo
(12) Add zone
(13) Copy zone
(14) Paste zone
(15) Flip view horizontally
(16) Flip view vertically
Table 3-8
Used to create new configuration of OS32C
Opens a configuration information file saved on PC
Saves created configuration information on PC
Prints OS32C configuration information
Shows current scanning zone information on the zone information screen in real-time
Enable/disable sculpting mode
Record OS32C scanning zone information
Playback previously recorded OS32C scanning zone information
(6) (7) (8) (9) (10) (11)
Change unit of measure (mm, cm, or inches)
Magnifies the zone information screen
Minimizes the zone information screen
Magnifies a specific area of the zone information screen
Shows the zone information screen with the OS32C in the center
Shows the zone information screen with minimum zoom
Enables/Disables view panning (Allow a user to click on the displayed zone and move
their mouse to adjust their view of the zone).
Enables/Disables the editing of zones
Convert zone being edited to a circular segment, polygon, or rectangle
Undo last action
Redo last action
Add a new zone to the configuration
Copy the zone currently selected (in the foreground).
Paste a copied zone to the zone currently selected (in the foreground).
Changes the PC screen view in a horizontal direction
Changes the PC screen view in a vertical direction
Basic Operation of Configuration Software
(15) (16)
(12) (13) (14)
E
OS32C
37
User's Manual