Omron OS32C Series User Manual page 142

Checkout
 Testing a Vertical Safety Zone
Fig. 6-2 Testing a vertical safety zone
Verify that all indicators and displays are operating properly and correspond to their defined functions
of the OS32C. Inspect the OS32C housing and the exit window for signs of damage or manipulation.
If the OS32C is used in a hand/arm guarding application, ensure that the OS32C resolution is
configured for 30mm or 40mm only.
If the OS32C fails this test, lock out the guarded equipment and contact the factory supervisor
immediately.
OS32C
122
User's Manual
Front View