Legislation And Standards - Omron OS32C Series User Manual

1. Application of an OS32C sensor by itself cannot receive the type approval provided by Article 44-2 of the
Labor Safety and Health Law of Japan. It is necessary to apply it as a system. Therefore, when using this
product in Japan as a "safety system for presses and shearing machines" as prescribed in Article 42 of the
Labor Safety and Health Law, the complete system must receive the type approval.
2. (1) This product is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU)
Machinery Directive Index Annex V, Item 2.
(2) This product complies with the following legislation and standards:
1) EU legislation
2) European & International
Standards
3) North American Standards: per UL File E241445, US and C-UL approvals (CNN: NIPM/NIPM7).
4) JIS standards
(3) This product received the following approvals from TÜV Rheinland of the EU.
-EC Type-Examination in accordance with the EU Machinery Directive, Type 3 ESPE (IEC61496-1),
Type 3 AOPDDR (IEC61496-3)

Legislation and Standards

Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Low Voltage Directive (2006/95/EC)
RoHS Directive (2002/95/EC)
EN 61496-1 (Type 3 ESPE)
EN 62061
EN 50178
EN ISO 13849-1
IEC 61496-3 (Type 3 AOPDDR)
IEC 61508, Parts 1-7 (SIL-2)
EN 60204-1
• ANSI/UL 508 (Industrial Control Equipment)
• ANSI B11.19
• ANSI/RIA R15.06
• NFPA 79
• Code of Federal Regulations CFR29
• IEC 61496-1 (Type 3 ESPE)
• IEC 61496-3 (Type 3 AOPDDR)
• UL 1998 (Software in Programmable Components)
• IEC 61508 (Functional Safety of Electrical/Electronic/Programmable
Electronic Safety-Related Systems)
• IEC 61508-3 (Functional Safety of Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 3: Software Requirements)
• CAN/CSA-C22.2 No. 14 (Industrial Control Equipment)
• CAN/CSA-C22.2 No. 0.8 (Safety Functions Incorporating Electronic
Technology)
JIS B 9704-1, JIS B 9704-3 (Type3 ESPE)
E
OS32C
i
User's Manual