Denso BHT-904B User Manual page 98

BHT-904B/BHT-914B
 "3: COM PORT": Setting the interface port
1.
Select "3: COM PORT" at the SET COMMUNICATION menu and
then press the ENT key.
The SET COM DEFAULT PORT menu screen displays as shown on the
right.
The highlighted settings will be the current settings.
"1: BASIC"
Selects the infrared communication (Optical) or connector communication (Co
be used for user programs written in BHT-BASIC (OPEN "COM:").
"Optical":
"Conn ector":
"2: SYSTEM MODE"
Selects the infrared communication (Optical) or
be used for downloading or uploading files in System Mode.
"Optical":
"Connector":
T o make changes, use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight the item to be set,
highlight the sett
Pr ess the Backspace/clear key to return to the SET
 "4: PROT
OCOL TYPE": Setting the communication protocol type
1.
Select "4: PROTO
m enu and then press the ENT key.
T he PROTOCOL TYPE menu screen displays as shown on the right.
The highlighted setting will be the current setting.
"1: Ymodem":
Selects Ymodem when uploading/downloading in System Mode or for
the exec tion of the XFILE statement in BHT-BASIC. u
"2: BHT Protocol":
Selects the BHT-protocol when uploading/downloading in System Mode or for the execution of the
XFILE statement in BHT-BASIC.
"3: BHT-Ir Protocol":
Selects the BHT-Ir protocol when uploading/downloading in System Mode or for the execution of the
XFILE statement in BHT-BASIC.
To make changes, use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to highlight the setting item,
and then press the ENT key.
To use the BHT-BASIC 4.0 Transfer Utility, select Ymodem or BHT-Ir protocol.
Press the Backspace/clear key to return to the SET COMMUNICATION menu.
84
Uses infrared communication.
Uses USB communication.
Uses infrared communication.
Uses USB communication.
ing value using the cursor keys ([◄] [►]), and then press the ENT key.
COL TYPE" at the SET COMMUNICATION
connector communicatio n (Connector) interface port to
COMMUNICATION menu.
nnector) interface port to