Denso BHT-904B User Manual page 121

[6] F ile test
The file test allows de
pressing the M1 key sorts the display sequence of files.
1.
S elect "6: FILE" at the TEST menu and then press
the ENT key.
The screen displays as shown on the right, and if any of
the files stored in the memory is defective, an asterisk (*)
or plus sign (+) is prefix
(s).
Refer to "Chapter 2 BHT Preparation" – "2.5.4 If the BHT
Is Shut Down Abnormally" for details about the (*) and (+).
"SIZE: bbbbb": Used memory size
"FREE: yyyyy": Available memory size
Files can be sorted each time the M1 key is pressed.
"TYPE": Sorts files by type.
"BROKEN": Displays broken files in descending order.
"BASIC": Displays files in the order of "B: BASIC files",
"C: C data files", and "None: Shared files and
program files".
If a defective file is found, delete it o
 Point 

overwrite it with a file with the same
name.
Even defective files can be uploaded at

the UPLOAD menu. It is therefore
recommended that important files be
uploaded before being deleted.
2.
Select the desired file and then press the ENT key.
The selected item is set and the next screen then appears.
Press the Backspace/clear key to return to the previous screen.
In the previous screen, the selected item is highlighted.
tailed information on program fi
ed to the name of the defective file
Barcode Handy Terminal
les, and data files to be checked. Additionally,
ENT key
M1 key
r
M1 key
M1 key
BS/C key
BS/C key
BS/C key
107