Denso BHT-904B User Manual page 89

"3: CODABAR": Detail setting of the Codabar (NW-7) reading
1.
Select "3: CODABAR" at the SET BARCODE menu and then press the ENT
The SET CODABAR screen ap
"1: MIN":
Sets the minimum number of the Codabar di
Setting range:
"2: MAX":
Sets the maximum number of the Codabar di
Setting range:
Always set the minimum number of digits to a number less than the maximum number of
 Point 
digits. If the minimum number exceeds the maximum number, a read error occurs
"3: START CODE ":
"4: STOP COD E":
Sets the star t and stop codes to "?, A, B, C, D".
If "A, B, C, " is specified, barcode reading is limited for the Codabar; the barcode D
and stop codes are the same as the specified characters is only read. If "?" is specified, no limitation
is carried out.
"5: CD CHECK":
"ON": Reading is carried out only if the check digit is corre
the check digit is incorrect or does not exit.
"OFF": Reading is carried out regardless of the presence of the check digit.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the ENT or Backspace/clear key to update the setting and return to the SET BARCODE
menu.
pears.
3 to 99
3 to 99
Barcode Handy Terminal
gits.
gits.
ct. Reading is not carried out if either
key.
for which the start
75