Denso BHT-904B User Manual page 59

Setting Value Selection
Use the following procedure to select setting values.
1.
Press the numeric key corresponding to the item to be
selected.
Alternatively, press the cursor keys ([▲] [▼]) to select
the item.
The selected item will be highlighted.
2.
Select the setting value with the cursor keys ([◄] [►]).
3.
Press the ENT key.
The selected setting value will be set.
Barcode Handy Terminal
 Operation example
Select the setting item with
the [2] key or [▲]/[▼] keys.
Select the setting value with
the cursor keys ([◄] [►]).
ENT key
45