Denso BHT-904B User Manual page 106

BHT-904B/BHT-914B
"2: IP ADDRESS": Setting the IP address
Select "2: IP ADDRESS" at the SET TCP/IP menu to display the screen
on the right where the current settings are displayed.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to highlight
the item to be set and press the ENT key.
(2) The mode changes to entry mode and the cursor displays, allowing the
setting to be entered with the numeric keys and dot key.
To delete a single character, press the Backspace/clear key.
the Backspace/clear key or press the SF and Backspace/clear keys si
(3) Enter the desired value and then press the ENT k
If the IP address, subnet mask and default gateway
P ress the Backspace/clear key to return to the SET TCP/IP menu.
S etting the timeout (only when COM1 selected)
S elect "3: TIMEOUT" at the SET TCP/IP menu to display the screen on
th e right where the current settings are displayed.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5]) to
highlight the
(2) The mode changes to entry mode and the cursor displays, allo
setting to be entered with the numeric keys and dot key.
To delete a single character, press the Backspace/clear key. To delete
the Backspace/clear key or press the SF and Backspace/clear keys simu
(3) Enter the desired value, and then press the ENT k
P ress the Backspace/clear key to return to the SET TCP/IP menu.
92
item to be set and press the ENT key.
To delete the entire entry, press and hold
multaneously.
ey.
are all set to [0.0.0.0], DHCP is enabled.
wing the
the entire entry, press and hold
ltaneously.
ey.