Denso BHT-904B User Manual page 112

BHT-904B/BHT-914B
[10] Setting the operation log
Use the following procedure to set the operation log.
1.
Select "3: OPERATION LOG" at the SET SYSTEM 2/2 menu
and then press the ENT key.
The SET OPERATION LOG menu appears.
The highlighted setting is the current setting.
2.
U se the cursor keys ([◄] [►]) to change the setting and then
p ress the ENT key.
"O N": An operation log file is created.
"O FF": An operation log file is not created.
3.
Press the ENT k
The setting is then updated.
98
ey.
ENT key