BHT-904B/BHT-914B
[7] Communication test
Use the following procedure to perform a communication test.
1.
Select "7: COMMUNICATION" at the TEST menu and then pr
the ENT key.
The TEST COMMUNICATION screen displays as shown on the
"1: OPTICAL":
"2: CONNECTOR":
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the TEST menu.
Infrared Communication Test
1.
Arrange two BHTs, one as a master station and the other as a
their IrDA interface ports facing each other as illustrated below.
This test involves transmitting data from the test BHT and the master BHT returnin
BHT.
2.
Select "1: OPTICAL" at the TEST COMMUNICATION menu and
then press the ENT key.
The TEST COMMUNICATION screen displays as shown on the right.
110
Performs an infrared communication test.
Performs the USB connect
Master BHT
ess
right.
ion test.
slave station (to be tested) with
Data
Max. 15 cm
g the data to the test
Slave BHT
(to be tested)