Denso BHT-904B User Manual page 151

[2] Uploading the BHT system parameter file
1.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight
[2: UPLOAD] and then press the ENT key.
The screen displays as shown on the right indicating that the BHT is
waiting for the system parameter file to be uploaded
2.
While the upload is in progress, the screen displays as shown on
the right indicating the file name and the number of sent
records/the total number of records.
Press the Backspace/clear key to abort the upload and return to the
SYSTEM PARAMETER menu.
3.
Upon completion of uploading, the BHT displays the screen
shown on the right and beeps once.
Press the Backspace/clear key to return to the SYSTEM PARAMETER
menu.
The beeper sounds three times if an error occurs during uploading, and
an error screen displays.
Refer to "Chapter 7 Error Messages" – "7.2 System Mode Errors" and remedy the error.
Barcode Handy Terminal
137