Denso BHT-904B User Manual page 96

BHT-904B/BHT-914B
"2: PROTOCOL": Communication protocol options setting screen
Select "2: PROTOCOL" to display the screen shown on the right.
The highlighted settings will be the current settings.
"1: SERIAL No.":
Selects whether or not to add serial numbers to data blocks
"2:H.PARITY":
Selects whether or not to add horizontal parity.
"3: LINKUP TIME:
Selects the timeout length (in seconds) to be applied when a link is to
"4 : FIELD SPACE:
To trim trailing spaces in fields, select "Ignore",
To make changes, use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to highlight the item to be
se t, highlight the
P ress the Backspace/clear key to return to the SET OPTICAL menu.
Selecting the BHT-Ir or Ymodem protocol ignores
 Point 
settings.
82
setting value using the cursor keys ([◄] [►]), and then press the ENT key.
be established.
and to retain them as data, select "Data".
the serial number and horizontal parity