Denso BHT-904B User Manual page 73

4.
By executing the BHT-BASIC 4.0 Transfer Utility or similar
program, the screen displays as shown on the right and file
uploading is commenced.
(Refer to the "BHT-BASIC4.0 Transfer Utility User's Guide.")
5.
The screen displa ys as shown on the right during uploading.
T he screen displays as shown on the right indicating the file name and the
number of sent records/the total number of records.
(When using the Ymo
(units: KB) displays.)
P ress the Backspace/clear key to abort the download process and return
to the UPLOAD menu.
6.
W hen uploading is complete, the beeper sounds once and the
screen displays as shown on the right.
When the number of sent records equa
downloading is complete.
(When using the Ymodem protocol, the sent file size equals the total file
size.)
Press the Backspac e/clear key to return to the UPLOAD menu.
If "2: ALL FILES" or "3: HT<-
u ploaded.
If an error message displays during uploading, refer to "Chapter 7 Error Messages".
dem protocol, the sent file size/the total file size
ls the total number of records,
->HT COPY" is selected, repeat the above operation until all files are
Barcode Handy Terminal
59