Denso BHT-904B User Manual page 105

[7] Setting the TCP/IP, FTP and DHCP
Use the following procedure to change the TCP/IP, FTP and DHCP settings.
1.
Select "7: TCP/IP" at the SET SYSTEM menu and
ENT key.
The SET TC P/IP menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric key
highlight the item to be set, and then press the ENT key.
"1: SET TCP/IP":
"2: SET FTP":
"3: SET D HCP":
Refer to the following section for deta
Press the Backspace/clear key to return to the SET SYSTEM menu.
 "1
: SET TCP/IP": Setting the TCP/IP
1.
Select "1: SET TCP/IP" at the SET TCP/IP menu and then pres
the ENT key.
The SET TCP/IP menu screen displays as shown on the right.
2.
Use the cu rsor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight
the item to b e set, and then press the ENT key.
Press the Backspace/clear key to return to the SET TCP/IP menu.
"1: DEVICE": Setting the TCP/IP device
Select "1: DEVICE" at the SET TCP/IP menu to display the screen on the
right where the current settings are displa
"1: TCP/IP DEVICE":
"2: LINK LAYER":
"3: TRANSMIT SPEED":
Press the Backspace/clear key to return to the SET TCP/IP menu.
Changes the TCP/IP setting.
Changes the FTP setting.
Changes the DHCP setting.
ils of the above items.
yed.
TCP/IP com munication device
Link layer
Communication speed with the CU
Barcode Handy Terminal
then press the
s ([1] [2] [3]) to
s
91