Denso BHT-904B User Manual page 87

EAN/UPC 3/3
(UPC-E setting)
"1: READING":
Enables or disables reading of the UPC-E.
"2: 1ST CHARACTER":
"3: 2ND CHARACTER":
Sets the first and second characters (country flag) of the UPC-E to "?, 0 to 9".
If "0 to 9" is specified, barcode reading is limited for the UPC-E; the
second characters are
carried out wit hout any limitation. (UPC-E add-on setting)
"4 : READING":
Enables or disables re
"5: ONLY":
If "ON" is specified, barcode reading is limited; the UPC-E with add-
specified, no limitation is carrie
"6 : DIGIT":
"2&5": Enables reading of the 2-, 5-digit add-on.
"2": Enables reading of the 2-digit add-on.
"5": Enables reading of the 5-digit
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5] [
3.
Pre ss the cursor keys ([◄] [►]) to select the desired setting.
4.
P ress the ENT or Backspace/clear key to update the
m enu.
the same as the specified numbers is read.
ading of the UPC-E with add-on.
d out.
add-on.
Barcode Handy Terminal
barcode for which the first and
If "?" is specified, reading is
on is only read. If "OFF" is
6 ]) to select the desired item.
setting and return to the SET BARCODE
73