Denso BHT-904B User Manual page 125

3.
At the slave BHT to be tested, select "1: SLAVE", an
master BHT, select "2: MASTER". Then press the ENT ke
The screen displays as shown on the right during the test, and an infrared
communication test is performed.
If an error occurs, the tested slave BHT beeps three times and displays
the screen on the right.
The meanings of the error codes in parentheses are as follow
( X X )
1: The received da
2: A timeout has occurred during standby for data reception.
1: 9600 bps
2: 115200 bps
3: 460800 bps
Press the Backspace/clear key to return to the TEST COMMUNICATION menu.
T he master BHT automatically returns to the TEST COMMUNICATION menu 10 seconds after the
o ccurren ce of an error.
U pon no rmal completion of the test, the tested
d isplays the screen on the right.
P ress th e Backspa ce/clear key to
m enu.
T he master BHT automatically returns to the TEST COMMUNICATION
menu.
ta is different from the sent data.
slave BHT be eps once and
return to the TEST COMMUNICATION
Barcode Handy Terminal
d at the
y.
s.
111