Denso BHT-904B User Manual page 181

7.2 System Mode Errors
When error messages display while running System Mode, refer to the following table and take appropriate
measures.
Message Cause
You attempted to execute a user program
in the EXECUTE PROGRAM menu, but
no user program files had been stored in
the memory.
The memory is insufficient for storing files
to be downloaded.
In the SYSTEM PARAMETER transfer
menu, you attempted to download a file
other than the BHT system parameter file.
Or in the SYSTEM MESSAGE transfer
menu, you attempted to download a file
other than the system message file.
The current download will exceed the
maximum allowable number of files (420
files) in the memory.
• Downloading has failed.
• Uploading has failed.
You attempted to download an invalid
program file.
Barcode Handy Terminal
Countermeasure
Press the Backspace/clear key to return to
the SYSTEM MENU, then download user
programs.
Press the [2] key to return to the SYSTEM
MENU, then delete unnecessary files in
the memory or decrease the size of the file
to be downloaded.
Check the file you attempted to download
and then download the file in the
appropriate menu (DOWNLOAD menu,
SYSTEM PARAMETER transfer menu, or
SYSTEM MESSAGE transfer menu).
Press the [2] key to return to the SYSTEM
MENU, then delete unnecessary files in
the memory (or decrease the number of
files to be downloaded if you attempted to
download more than one file in the
DOWNLOAD menu.)
• To retry downloading/uploading, press
the [1] key.
• To return to the SYSTEM MENU, press
the [2] key. Check the interface port,
communications parameters, and
communications protocol in the SET
SYSTEM menu or perform the
communications test in the TEST menu.
Check whether the program file you
attempted to download is available to the
BHT-900 model. If it is not available,
download the appropriate program.
167