Denso BHT-904B User Manual page 102

BHT-904B/BHT-914B
[6] Defining the functions of the Shift key and Magic keys
Use the following procedure to change the key settings.
1.
Select "6: KEY" at the SET SYSTEM menu and then press the ENT
key.
The SET KEY menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric key
[7] [8]) to highlight the item to be set, and
"1 : SHIFT KEY":
"2: M1 KEY":
"3 : M2 KEY":
"4 : M3 KEY":
"5 : M4 KEY":
"6: M5 KEY":
"7 : BS/C KEY"
"8: ME NU KEY":
Refer t o the following section for details of the above items.
P ress the Backspace/clear key to return to the SET COMMUNICATION menu.
 "1: SHIFT KEY": Definin
1.
Select "1: SHIFT KEY" at
ENT key.
The SET SHIFT KEY
The highlighted setting will be the current setting.
"1: Nonlock":
Shifts t he keypad only when the SF key is held down.
"2: Onetime":
S hifts only the key pressed immediately after the SF key is pressed.
( The following keys will not be shifted.)
2.
U se the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight the item to be set, and then
press the ENT key.
The selected item will be set and the screen will return to the SET KEY menu.
88
Displays the SF key definition screen.
Displays the M1 key definition screen.
Displays the M2 key definition screen.
Displays the M3 (left-hand trigger switch) key defini
Displays the M4 (right-han
Displays the M5 key (SCAN key) definition screen.
: Displays the Backspace/clear key definition screen.
Displays the M1 - M5 key menu definition
g the Shift key
the SET K
menu s creen displays as s
s ([1] [2] [3] [4] [5] [6]
then press the ENT key.
d trigger switch) key definition screen.
screen.
function
EY menu and then press the
hown on the right.
tion screen.