Installing The Server - Cisco UCS C210 Installation And Service Manual

Installing the Server

This chapter describes how to install the server and includes the following sections:
Unpacking and Inspecting the Server, page 2-2
•
Preparing for Installation, page 2-3
•
• Installing the Server Into a Rack, page 2-4
• Initial Server Setup, page 2-9
• System BIOS and CIMC Firmware, page 2-13
Before you install, operate, or service a server, review the
Note
Information for Cisco UCS C-Series Servers
IMPORTANT SAFETY INSTRUCTIONS
Warning

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device. 
Statement 1071
SAVE THESE INSTRUCTIONS
Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Warning
Statement 1030
OL-20887-02
C H A P T E R
Regulatory Compliance and Safety
for important safety information.
Cisco UCS C210 Server Installation and Service Guide
2
2-1