Preparing For Component Installation; Required Equipment - Cisco UCS C210 Installation And Service Manual

Chapter

Preparing for Component Installation

This section describes how to prepare the server for component installation or replacement and includes the
following topics:
•
•
•
•
•
•
Warning Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Statement 1030
Warning This unit might have more than one power cord. To reduce the risk of electric shock, disconnect the
two power supply cords before servicing the unit. Statement 14

Required Equipment

The following items are used to perform the procedures in this chapter:
•
•
•
•
OL-20887-02
Required Equipment, page 3-7
Shutting Down and Powering Off the Server, page 3-8
Removing and Replacing the Server in a Rack, page 3-9
Removing and Replacing the Server Top Cover, page 3-10
Removing and Replacing the Server Front Cover, page 3-11
Replaceable Component Locations, page 3-12
Number 1 Phillips-head screwdriver
Number 2 Phillips-head screwdriver
Needle-nose pliers
Electrostatic discharge (ESD) strap or other grounding equipment such as a grounded mat.
Cisco UCS C210 Server Installation and Service Guide
3-7