Installing The Server; Preparing For Installation; Installation Warnings And Guidelines - Cisco SE-CL-L3 Installation Manual

Installing the Server

•
•
•
•
•
•
•
•
•
•

Preparing for Installation

This section contains the following topics:

Installation Warnings and Guidelines

Note
Before you install, operate, or service a server, review the
important safety information.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
Statement 1071
Preparing for Installation, on page 9
Installing the Server in a Rack, on page 12
Installing the Cable Management Arm (Optional), on page 14
Reversing the Cable Management Arm (Optional), on page 15
Initial Server Setup, on page 16
Connecting to the Server Locally For Setup, on page 17
Connecting to the Server Remotely For Setup, on page 18
Updating the BIOS and Cisco IMC Firmware, on page 19
Accessing the System BIOS, on page 19
Smart Access Serial, on page 20
C H A P T E R
Regulatory Compliance and Safety Information
Cisco Application Services Engine Hardware Installation Guide
2
for
9