Upgrade And Connection Procedures - Cisco UCS C210 Installation And Service Manual

Generations m1 and m2
Hide thumbs Also See for UCS C210:
Table of Contents

Advertisement

Appendix
Note

Upgrade and Connection Procedures

Use the procedures in this section in the following order to upgrade your server and connect it to the
Cisco UCS environment:
These procedures assume that you have already installed the server in your rack and connected it to
Note
power. See
(Standalone Mode), page
1. Upgrading the Firmware and Rebooting in UCSM Mode
Find the Host Upgrade Utility ISO file download for your server online and download it to a temporary
Step 1
location on your workstation:
a.
b.
c.
d.
e.
f.
Note
g.
h.
i.
OL-20887-02
Two Cisco Nexus 2248 FEXes.
You must plug a power cord into each of the two power supplies in the FEX. If a power supply
is not connected to power, you might see "Major" faults reported during power-on self test
(POST). For example,
connecting the missing power cord to the FEX power supply.
Two RJ-45 Ethernet cables.
Four 10-Gb SFP cables.
Installing the Server Into a Rack, page 2-4
2-9.
1. Upgrading the Firmware and Rebooting in UCSM Mode, page D-15
2. Physically Connecting the Server to the Cisco UCS Environment, page D-17
See the following URL: http://www.cisco.com/cisco/software/navigator.html
Click Unified Computing and Servers in the middle column.
Click Cisco UCS C-Series Rack-Mount Standalone Server Software in the right-hand column.
Click your model of server in the right-hand column.
Click Unified Computing System (UCS) Server Firmware.
Click the release number that you are downloading.
Release 1.2(2xx) is the required level for Cisco UCS Manager 1.4(1x) or 2.0(1x) integration.
Click Download Now to download the ISO file.
Verify the information on the next page, then click Proceed With Download.
Continue through the subsequent screens to accept the license agreement and then browse to a
location where you will save the ISO file.
Power supply 1 in fex 6 power: error
and
Cisco UCS C210 Server Installation and Service Guide
. You can clear these errors by
Connecting and Powering On the Server
D-15

Advertisement

Table of Contents
loading

Table of Contents