Cisco UCS C210 Installation And Service Manual page 5

RAID Controller Considerations
C
A P P E N D I X
Installation for Cisco UCS Integration
D
A P P E N D I X
OL-20887-02
Supported Power Cords and Plugs
AC Power Cord Illustrations
Supported RAID Controllers and Required Cables
Enabling the Integrated Intel ICH10R RAID Controller in the BIOS
Enabling the Mezzanine Card RAID Controller in the BIOS
RAID Controller Cabling
C-3
How to Determine Which Controller Is in Your Server
How to Disable Quiet Boot for CIMC Firmware Earlier Than Release 1.2(1)
How To Launch Option ROM-Based Controller Utilities
LSI MegaRAID Card Beep Codes
Restoring RAID Configuration After Replacing a RAID Controller
For More Information
C-7
Integration With Cisco UCS Manager 2.0(2xx) and Later
Integrating a Release 1.4(3c) or Later Server With Cisco UCS Manager 2.0(2xx)
Hard-Pinning Mode and Port-Channel Mode Discovery Policies
Required Items
D-3
Procedure
D-4
Upgrading a Server Earlier Than Release 1.4(3c) for Cisco UCS Manager 2.0(2) Integration
Required Items
D-6
Upgrade and Connection Procedures
Integration With Cisco UCS Manager Earlier Than 2.0(2xx)
Installing a Release 1.2(2xx) Server With Cisco UCS Manager 1.4 or 2.0(1)
Required Items
D-11
Procedure
D-12
Upgrading a Server Earlier Than Release 1.2(2) For Cisco UCS Manager 1.4 or 2.0(1)
Integration
D-14
Required Items
D-14
Upgrade and Connection Procedures
Migrating an Earlier Configuration to Release 2.0(2xx) or Later
Supported Network Adapter Cards for UCSM Mode
Supported Adapter Cards
Supported Card Combinations
Reverting a Server From UCSM Mode to Standalone Mode
Special Considerations For Integrated Servers
B-2
B-3
C-1
C-1
C-3
C-4
C-5
C-6
D-1
D-2
D-7
D-15
D-20
D-20
D-20
D-21
Cisco UCS C210 Server Installation and Service Guide
C-2
C-5
C-6
D-2
D-2
D-11
D-11
D-19
D-21
Contents
D-6
v