Status LEDs
This section describes the locations and interpretations of LEDs on the server that can provide status and
troubleshooting information. This section includes the following topics:
•
•
Front Panel LEDs
Figure 3-1
Figure 3-1
3
2
1
1
3
5
7
9
Table 3-1
Table 3-1
LED Name
Locator
Network activity
Cisco UCS C210 Server Installation and Service Guide
3-2
Front Panel LEDs, page 3-2
Rear Panel LEDs, page 3-4
shows the names and locations of the front panel LEDs.
Front Panel LEDs
6
4
7
Locator LED/Locator button
System fault LED
CPU fault LED
Power supply fault LED
Hard drive activity LED
describes the possible states and interpretations for the LEDs that are shown in
Front Panel LEDs
8
2
Network activity LED
4
Power status LED/Power button
6
Memory fault LED
8
DVD activity LED
10 Hard drive fault LED
State
Off—The Locator LED is not in use.
•
Blue, flashing—The Locator LED button was pressed and the
•
Locator LED flashes on the front and rear panels to help you find
the server in a rack.
Off—The server is powered off or in standby power mode.
•
Green, blinking—The server is communicating with the network in
•
main power mode. The blink rate is faster as network activity
increases.
9
10
Chapter
Figure
3-1.
OL-20887-02