Installing The Server; Preparing For Installation; Installation Warnings And Guidelines - Cisco APIC M4 Installation And Service Manual

Installing the Server

•
•
•
•
•
•
•
•

Preparing for Installation

This section contains the following topics:

Installation Warnings and Guidelines

Note
Warning
Preparing for Installation, on page 19
Installing the Server in a Rack, on page 22
Initial Server Setup, on page 26
NIC Mode and NIC Redundancy Settings, on page 30
Updating the BIOS and Cisco IMC Firmware, on page 31
Accessing the System BIOS, on page 31
Smart Access Serial, on page 32
Smart Access USB, on page 32
Before you install, operate, or service a server, review the
for important safety information.
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. Use the statement number provided at
the end of each warning to locate its translation in the translated safety warnings that accompanied
this device.
Statement 1071
C H A P T E R
Regulatory Compliance and Safety Information
Cisco APIC M4/L4 Server Installation and Service Guide
2
19