Maintaining the Server
This chapter describes how to diagnose hardware problems with status LEDs and how to install or
replace hardware components, and includes the following sections:
•
•
•
•
Server Monitoring and Management Tools
Cisco Integrated Management Interface (CIMC)
You can monitor the server inventory, health, and system event logs by using the built-in Cisco Integrated
Management Controller (CIMC) GUI or CLI interfaces. See the user documentation for your firmware
release at the following URL:
http://www.cisco.com/en/US/products/ps10739/products_installation_and_configuration_guides_list.html
Server Configuration Utility
Cisco has also developed the Cisco Server Configuration Utility for C-Series servers, which can aid and
simplify the following tasks:
•
•
•
•
•
This utility is shipped with new servers on CD. You can also download the ISO from Cisco.com. See the
user documentation for this utility at the following URL:
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/ucsscu/user/guide/20/SCUUG20.html
OL-20887-02
Server Monitoring and Management Tools, page 3-1
Status LEDs, page 3-2
Preparing for Component Installation, page 3-7
Installing or Replacing Components, page 3-13
Monitoring server inventory and health
Diagnosing common server problems with diagnostic tools and logs
Setting the BIOS booting order
Configuring some RAID configurations
Installing operating systems
C H A P T E R
Cisco UCS C210 Server Installation and Service Guide
3
3-1