Cisco UCS C210 Installation And Service Manual page 113

Appendix
Alternatively, you can use the VGA and USB ports on the rear panel. However, you cannot use the front
Note
panel VGA and the rear panel VGA at the same time. If you are connected to one VGA connector and
you then connect a video device to the other connector, the first VGA connector is disabled.
Reboot the server.
Step 6
Step 7 To view and configure settings for the server from within the Cisco UCS Manager software, see the
information instructions in the
UCS Manager Configuration Guide for Release
Figure D-4
1 Cisco UCS 6100 Series or 6200 Series FI
(Fabric A)
Cisco Nexus 2248 FEX 
2
(Fabric A)
3 Cisco UCS 6100 Series or 6200 Series FI
(Fabric B)
Cisco Nexus 2248 FEX 
4
(Fabric B)
Note The paths shown in blue carry management traffic. The paths shown in gold carry data traffic.
OL-20887-02
Cisco UCS Manager Configuration Guide for Release 1.4(1)
Cabling Configuration For Cisco UCS Manager 1.4(nx) Integration
1
Fabric A
10Gb
2
5
2.0(1).
3
4
10Gb
1Gb
6
5 Cisco UCS C210 M2 (or later) server
6 1-Gb Ethernet LOM ports
7 10-Gb adapter card in PCIe slot 1
Cisco UCS C210 Server Installation and Service Guide
or the Cisco
Fabric B
10Gb
7
D-13