Texas Instruments 990 User Manual page 78

Coostr uction and Acti vation
After a filename is entered in response to the
CONTROL FILE ACCESS NAME prompt, a link edi t control stream is
creat ed on thi s pathname. In the followi ng example of a control
stream, all remote SCI commands are sel ected:
PARrIAL
PHASE 0, REMSCI
INCL UDE O.MAIN
INCL UDE O. LM
I NCL UDE O. MM
I NCL UDE O. S'IS
INCL UDE O.XT
INCLUDE O.KT
INCLUDE O.LUNO
INCLUDE O.CRU
I NCL UDE O. TRA CE
INCL UDE O. BRKPNl'
INCL UDE O. SIS
INCL UDE O. SWR
I NCL UDE O. TIME
INCL UDE O. LOA DE R
INCL UDE O. NID
NOl'GLOBAL
GLOBAL REMSCI
END
I f MODIFY MEMORY and READ/WRITE CRU were not selected, as in the
previous example, the statements INCLUDE O.MM and INCLUDE O.CRU
would be omitted.
After link control file creation, the TX5 Remote SCI program is
ready to
be
linked. Prior to enteri ng the SCI Execute Linkage
Edi tor (XLE)
command, the synonym 0 must be
assigned using the
SCI Assign Synonym (AS) command as follows:
AS S=O, V=. INDSCDMM. TXOBJ
After the synonym is assigned, the remote SCI can be linked by
entering the XLE command as follows:
[] XLE
EXECUTE LINKAGE EDITOR
CONTROL ACCESS NAME:
LINKED OUTPtJr ACCESS NAME:
LISTING ACCESS NAME:
PRIm' WI DTH:
<control>
<linkfile>
<listing>
80
3-32 2270526-9701