Texas Instruments 990 User Manual page 151

Appl
ications
U
til i ti es
5. 4. 3.2 Assi gn L UNO (AL) Canmand.
The AL command assigns a LUNO to a specified device or file at
the secondary station. The prompts and example resp::>nses for the
command are as f Qll.QW.;U ..
<> AL
REM)TE ASSICN LUNO
SEmNDARY ID: 3124
LUNO: >17
ACCESS NAME: LPOl
(example
res p::>ns es )
The res};Onses must conform to the following requirements:
* SEmNDARY ID. Enter the network ID assigned to the
remote SCI tas kin the desi red secondary station.
*
LUNO. Enter the logical unit number.
*
ACCESS NAME. Thi s is the access name of the fi1 e or
devi ce in the secondar y station to whi ch the LUNO is to
be ass i gned •
NOTE
The
TX5
system must include file management
and file util i ty modu1 es to support thi s
command. Ref er to Appendi x C for further
i nstr ucti ons •
2270526-9701 5-29