Texas Instruments 990 User Manual page 52

Constr uction and Acti vation
Table 3-1 HDLC Directories and Files
Directory and Filename Description
.INOSCOMM.NETGEN.CONFIG System configuration file,
containing data that describes the
networ k. It is created and
maintained by NETGEN. The user
need not access this file •
• INOSCOMM.C$SOURCE File containing the NITs for the
DXIO primary. It is assembled and
1 inked wi th the comm un i cat ions
software •
• INOSCOMM.NETBAT File containing the batch stream
buil t by NETGEN. It is bid by the
communications system generator
(COMMGEN) and bui Ids one level 2
table and one offload control file
for each FCCC board. The results
of executing this batch stream are
written to .INOSCOMM.NETLST.
• INOSCOMM.C$TABLEn File containing the data
structures required for the nth
FCCC board where n
=
1, 2, 3, etc.
The data structures define each
line and the associ ated secondary
stations. They are assembled and
linked wi th the FCCC software by
the COMMGEN procedure.
• INOSCOMM.CONTROLn File used to offload the nth FCCC
bo ar d, w he r e n is 1, 2 , 3 , etc.
• INOSCOMM.NETGEN. SECnnnn File that is unique to each TX5
secondary station included in the
system. The filename is created
by usi ng a four- di gi t, bi nar y-
coded decimal number (nnnn) that
is unique within the network.
This file must be assembled and
linked with the TX5 secondary
system. The object and listing
files must be named by the user
and it is recommended that those
files be incl uded in the same
directory. An example follows:
• INDSCOMM.NETGEN. CBJEcr. SECnnnn
• INOS COMM. NETGEN. LIST. SECnnnn
3-6
2270526-9701