Texas Instruments 990 User Manual page 143

llppl icati ons U t i l i ti es
5. 4. 2 Remot e SCI Canm and Menus
The following paragraphs describe the various menus that appear
when remote SCI is requested and the individual commands
associated with each menu.
The ini ti al menu that appears when the util i ty is acti vated by
the REmCI command is as follows:
[] REM3CI
TEXAS INSTRUMENrS
REIDTE mMMAND INTER!? RETER
SELEcr A MENU FR:>M BELOW:
/DEBUG
/TASK
/LUNO
/MISC
- DEB UG COMMANIE
<>
TASK COMMAN03
LUNO COMMANOO
MISCELLANEOUS <DMMAN03
Each menu selected from the above set displays a different list
of available oommands. The followi ng menus appear when the aoove
commands are entered. Note that when remote SCI is activated,
the <> prompt appears.
5.4.2.1 Derug Canmand Menu.
When the /DEBUG oommand is entered" the following menu appears:
<> /DEBUG
<>
REIDTE IEB UG COMMANOO
AS - ASS leN BREAKPOINT
LB - LIST BREAKPOINTS
DW - DUMP VDRK SPACE
MM -
IDDIFY MEIDRY
MSM - IDDIFY SYSTEM MEM)RY
RCRU- READ CRU
2270526-9701 5-21
DB - DELETE BREAKPOINTS
TR - TPACE LOCATICN
SV - SHOW VALUE
LM - LIST MEM)RY
LSM - LIST SYSTEM MEM)RY
VCRU- WRITE CRU