Texas Instruments 990 User Manual page 119

<st code>
Applications Programming
06 Request is made for the applications
program to be bid when input data
from any station is addressed to it.
Applications programs that request
activation from termination, in that
they request to be bid, must be
installed in a DXlO program file
named .INDSCOMM.USERPROG and global
LUNO >40 must be assigned to the
file. The bid task service in TX5 is
supported for resident tasks only.
07 Request is made to remove the
applications program from the
activation services list.
is the variable to
the status code.
check the status
appropriate action.
are as follows:
Code
which the subroutine returns
The calling program should
code re turned and take
The codes and their meanings
Meaning
00 Activation services has accepted the
call.
01 Illegal option code specified.
02 Not used.
03 Invalid task ID. The program
requesting activation services must
have a network ID assigned to it by
the network generator program NETGEN.
04 Not used.
05 System buffers are full; unable to
accept the request.
06 Communications package inactive. In
the primary station, this request is
not accepted. In TX5 secondary
sta tions, the request is accepted in
spite of this condition.
2270526-9701 4-33