Texas Instruments 990 User Manual page 72

Constr uction and Acti vation
Enter an input value to the following prompt:
NETIDRK ID TO CHANGE: 1101
NETGEN resp:::>nds with a procedural message confirming that the
val ue entered is an input entr y, that is, a DXIO or a TX5 t as k,
or a TM990 entry.
ID 1101 IS AN INPUl' ENTRY
For a DXlO or TX5 entry the following prompt is displayed next:
TASK ID
=
>28 :
For a TM990 entry the following prompt is displayed:
TM990 SEOONDARY ID
=
1200 :
In either case, enter the new network ID and RETURN. NETGEN then
di spl ays the ADD, BUILD, CHANGE, OR DELETE prompt.
3-26 2270526-9701