Texas Instruments 990 User Manual page 164

App1 ications Utili ti es
5.4.3.21 Trace (TR) Canmand.
The TR command displays (on the 990/5 front panel indicators at a
specified secondary station) the contents of a specified address.
If the task is the TX5 operating system, the address is
interpreted as an absolute address (that is, referenced to
address 0 in the secondary station). The prompts and example
resp:>nses for the command are as follows:
<> TR
RE
M)TE TRA
CE
SECDNDARY I D: 1002
TASK ID: >5F
ADDRESS: >100
(example
res J;X>ns es )
The resp:>nses must conform to the fo11owi ng requi rements:
*
*
SEmNMRY ID. Enter the network ID assigned to the
remote SCI tas kin the desi red secondary station.
TASK ID. Enter the hexadecimal number assigned to the
t as k a t the tim e of
T
X5 s
ys
t em ge ne r at ion, ,or take the
def aul t (by pressi ng the RETURN key). If S is entered
or the default is taken, the specified address is
interpreted as absolute.
*
ADDRESS. Enter the address to be displayed.
address is entered, the trace is removed.
If no
5-42
2270526-9701