Texas Instruments 990 User Manual page 198

Appl icati ons U til i ti es
The example restnnses to the prompts show a station ID and the
VOl' designated to receive the report. The report is displayed in
the follow format:
--- HOI.
CLINE :(NFORMAT ICN ===
FCCC DEVICE NAME
=
(MOl
MESSAGES: OUT
=
****
POLLS:
=
****
LINE ERroRS :
----------_
.....
-
TIME OUTS
STAT ICN ID
=
NNNN
IN
=
****
RESPCNSES =
****
=
*****
RETRAN:) MISS ICNS =
*****
RESETS =
*****
MESSAGE SE(UENCE ERroRS
= *****
OFF LINE mUNT
= *****
INPUI' ERroRS =
*****
OUTP
ill'
E RID RS
= *****
DROP ADDRE SS
=
NN
TIME IELAY BETWEEN POLLS:
=
***. ***
SEo)NOO
CLOCK TIMES: WARM STARI':MM/DD/HH:MM:SS CURRENr :MM/DD/HH:MM:SS
5.5.3.3 Line/S tation Reset (LR) Canmand.
The LR command can be used to reset the statistical oounters
pertaining to a station or to all stations on a line. To use
this function, enter LR in restnnse to the ENrER RE(UEST prompt.
The statistics p:lckage restnnds with the following display:
RESET LINE
FCCC DEVICE NAME (CMXX): 0
S TAT I CN I D ( 01 00 -9 999): 0 I 00
The resIX>nses to the prompts are examples of a secondary station
IO and the oorresIX>nding FCCC channel. To reset the oounters for
a single station, enter its ID in resp::>nse to the
ENrER STATICN ID prompt. To reset the counters for all stations.
on the line specified in resIX>nse to the first prompt, default
through the second prompt. Resetting any or all of the line
counts has no effect at all on the network or station statistics.
5-76
2270526-9701