Texas Instruments 990 User Manual page 162

Appl icati ons U til i ti es
5.4.3.17 Srow Date and Time (SDr) Canmand.
The
sm
command displays (on the interacti ve terminal where the
request was entered) the specified secondary clock. The prompts
and example resIX>nses for the command are as follows:
<> SDr
REMJTE SHOW DATE AND TIME
SECONDARY
10:
1012 (example response)
1980/07/3009 :06 :03
Enter the network
10
assigned to the remote SCI task in the
desi red secondary station in resIX>nse to the SECOND SECONmRY
10
prompt •
5. 4.3.18 Srow I np.;lt/OutlXlt S tat us (SIS) C anm and •
The S
IS
command di splays (on the interacti ve terminal where the
request was ent ered) the inp.l t/ outlXlt st at us of the s peci fi
ed
device LtNO. Alternatively, the inp.lt/output status of all LUNOs
can
be
displayed. The prompts and example responses for the
command are as follows:
<> SIS
REMJTE SHOW I/O STATUS
SEQ)NDARY
10:
1002
LUNO: >3F
(e xampl e
res IX>ns es )
The resIX>nses must conform to the following requirements:
*
SECONDARY ID. Enter the network
10
assigned to the
remote SCI tas kin the desi red secondary station.
*
LtNO. Ent er the logi cal uni t num ber, or take the
def aul t by pressi ng the RETURN key. If the def aul t i s
taken, the status of all device LUNOs is displayed.
5-40 22 70526-9701