GCA70–226
8.2
Sending LCD Messages
You can set system-supplied messages at your station to be received and
displayed by a calling LCD speakerphone. These messages give the
caller information on your telephone status. Get a list of the available
messages from the attendant and write them on the blank chart on the
next page.
• To turn on a message from your telephone,
1. Press INTERCOM, then dial
2. Dial the desired code number from your message list (01–30)
on the next page. Alternately you can use the HOLD button to
scroll through the available messages and dial # when you
scroll to the message you want to use. If you use the default
messages Back at and Call, add to them as follows:
For Back at message, dial the code for time numbers and
colon from Dialing Code Table below (for example, dial
# 00 01 29 04 05 for the time 01:45).
For Call message, dial code for telephone number of where
you'll be (for example, dial # 09 07 08 15 02 02 00 00 for the
number 978–2200,
3. Press #, then press SPEAKER to end message.
4. Intercom light flashes.
• To turn off the message and your intercom light,
1. Press INTERCOM, then dial
Character
Dialing Code
1
01
2
02
3
03
4
04
5
05
6
06
7
07
Sending And Receiving Non-Verbal Messages
0 2.
#
0 2.
Dialing Code Table
Character
8
9
0
space
–
:
LCD Speakerphone Reference Guide 8 – 3
Dialing Code
08
09
00
12
15
29