Comdial Imression 2022S Reference Manual page 92

Programming Your Telephone
Park Button (PARK)—parks calls in preselected park orbit.
Pick-Up Button (PCKUP)—allows you to pick up a call ringing
elsewhere in your system.
Privacy Release Button (PRIV)—releases privacy for current call.
Saved Number Redial Button (SAVE)—redials the last number saved
at this button location (good for short-term storage).
Voice-Announce Block Button (VAB)—blocks voice announcements.
*Available only on DigiTech telephones.
•
To create these feature access buttons proceed as follows:
1. Press OPTIONS.
2. Press NEXT until the FEAT option appears.
3. Press FEAT.
4. Press NEXT repeatedly until desired feature choice is
displayed.
5. Press one of the buttons below the current display to choose
desired selection.
6. Respond to any menu prompts associated with feature (such as
all-call or zone 1 to 9 for PAGE).
7. Press programmable button for storage location.
8. Press FEAT again to program the next feature.
9. Repeat last two steps until all features are programmed,
—OR—
press EXIT to end programming.
• To clear a feature button assignment,
1. Repeat the above procedure, but press CLEAR before pressing
storage location button.
9 – 6 LCD Speakerphone Reference Manual
GCA70–226