GCA70–226
7.24 Using Automatic Set Relocation
If your installer has equipped your system with automatic set relocation,
you can move your telephone to another location and be given a choice
(through a display prompt) as to whether you want to keep your previous
programming or use the programming in the new location. Respond to
the prompt according to your need.
• To maintain the extension number and programming
features from the old location,
1. Connect the telephone line cord to the new jack.
2. Note the flashing HOLD light and press the HOLD button
while the light is still flashing (your telephone immediately
assumes the features from the previous location),
—OR—
do nothing until the HOLD light stops flashing (your
telephone automatically assumes the features from the
previous location).
• For your telephone to assume the extension number and
programming features from the new location,
1. Connect the telephone line cord to the new jack.
2. Note the flashing HOLD light and press the # button with the
light is still flashing (your telephone immediately assumes the
features from the new location).
Using The Other Telephone Features
LCD Speakerphone Reference Manual 7 – 27