Sending Lcd Messages - Comdial 8312S System Reference Manual

GCA70–250
8.2

Sending LCD Messages

You can set system-supplied messages at your station to be received and
displayed by a calling LCD speakerphone. These messages give the
caller information on your telephone status. Get a list of the available
messages from the attendant and write them on the blank chart on the
next page.
To turn on a message from your telephone,
1. Press INTERCOM, then dial
2. Dial the desired code number from your message list (01–30) on
the next page. Alternately you can use the HOLD button to scroll
through the available messages and dial # when you scroll to the
message you want to use. If you use the default messages Back at
and Call, add to them as follows:
For Back at message, dial the code for time numbers and colon
from dialing codes table (for example, dial # 00 01 29 04 05 for
the time 01:45).
For Call message, dial code for telephone number of where you'll
be (for example, dial # 09 07 08 15 02 02 00 00 for the number
978–2200.
3. Press #, then press SPEAKER to end message.
4. Intercom light flashes.
To turn off the message and your intercom light,
1. Press INTERCOM, then dial
Character Dialing Code
1 01
2 02
3 03
4 04
5 05
6 06
7 07
Sending And Receiving Non-Verbal Messages
0 2.
#
0 2.
Dialing Code Table
Character
8
9
0
space
–
:
LCD Speakerphone Reference Guide 8 – 3
Dialing Code
08
09
00
12
15
29