Table of Contents
Advertisement
GCA70–226
5. Dial code to make your speed dial route selection choice from
the following list:
NOTE: If the code for the desired line is less than three digits, dial #
once after you dial the line code. (For example, dial 1# for line
1 or 19# for line 19.) dial 1#–99# to select lines 1–99
dial 1#–99# to select lines 1–99
dial 100–128 to select lines 100–128
dial 801–816 to select line groups 1–16,
dial 000 to select prime or last line used,
dial 888 to select intercom
6. Dial the number to be stored (up to 32 digits long—include
and # if needed).
NOTE: You may need a pause between numbers to compensate for
differences in response time between your system and the host
system. To store a pause, press HOLD, then continue dialing.
If your system is behind a host system that needs a hookflash
to access a feature, press TAP to store a hookflash, then
continue dialing.
7. Press Transfer/Conference to store number.
8. Dial next storage location, store line choice and speed dial
number, and press Transfer/Conference.
9. Repeat previous step until all numbers are stored.
10. Press SPEAKER to end.
Using The Attendant Features
LCD Speakerphone Reference Manual 10 – 19
Advertisement
Table of Contents
